|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
PULSEJACK THROUGH HOLE, TAB, UP RJ-45 JACK WITH INTEGRATED MAGNETICS AND LINE SIDE PROTECTION Designed for PMC-Sierra PM 4351/4354 T1/E1 Short Haul applications 1x1, shielded PulseJack will provide surge protection within Telecom access and transmission equipment Patented InterLock Base construction for high reliability High performance for maximum EMI suppression Minimum 1500 Vrms isolation Electrical Specifications @ 25C -- Operating Temperature 0C to +70C Part Number J1501F21 Turns Ratio (Pri:Sec 2%) Transmit Receive 1:2.42 1:2.42 OCL (mH MIN) 1.2 CW/W (pF MAX) 100 LL (H MAX) 0.6 & 0.6 DCR Pri (W MAX) 0.7 & 0.7 Primary Pins 1T - 2T, 4T - 5T TM For T1/E1/CEPT/ISDN-Pri Applications Notes: Different electrical and mechanical specifications can be accommodated. Contact Pulse Applications Engineering at (858) 674-8100 for more information. Mechanical FRONT VIEW SIDE VIEW BACK VIEW .640 16,26 FRONT 1.00 MAX 25,40 BACK Patent Pending TM .532 13,51 .125 3,18 LEADS .010 0,25 J1501F21 Date Code Country of Origin .150 SHIELD TABS 3,81 HOUSING POST .110 (post and shield) 2,79 .425 .010 10,80 0,25 .250 6,35 .100 2,54 .130 3,30 .003 0,08 PIN 1C PIN 1T PRELIMINARY T667.P (1/02) * * * * * U.S: 858 674 8100 U.K: 44 1483 401 700 France: 33 3 84 35 04 04 Singapore: 65 287 8998 Taiwan: 886 2 2698 0228 http://www.pulseeng.com PULSEJACK THROUGH HOLE, TAB UP RJ-45 JACK WITH INTEGRATED MAGNETICS AND LINE SIDE PROTECTION For T1/E1/CEPT/ISDN-Pri Applications Schematics 1T T1 2T PCB Side 4T T2 5T 1:2.42 1:2.42 F2 F1 1C 2X .000 0,00 TM Suggested PCB Layout (Viewed from Component Side) Outline of Connector PIN #1 .100 2,54 .130 3,30 8X .035 0,89 .003 0,08 .250 6,35 2X .128 3,25 .003 0,08 Surge Suppressor 2C Cable Side 4C .064 1,63 .003 0,08 .675 17,15 .135 3,43 .050 1,27 .000 0,00 .050 1,27 .100 2,54 Surge Suppressor 5C .485 12,32 .400 10,16 .350 8,89 .300 7,62 Advantages of the PulseJack Modules Increased Reliability Pulse developed a patented method for ensuring the quality, consistency, and connection integrity of encapsulated coils and other three-dimensional electronic components. The InterLock Base consists of an internal plastic carrier that holds the coil firmly in place and provides precisely engineered "lead-channels" to lock together the lead wires and the leadframe pins. All of the InterLock Base interconnections are then simultaneously dip soldered, providing for both efficiency and uniformity for best common mode rejection and crosstalk. Higher Manufacturing Yields Because of this Pulse patented higher reliability method, there is less of a chance of opens and shorts, thus providing higher yields. .250 .150 6,35 3,81 .200 5,08 Consistent Electrical and Magnetic Performance - With internal magnetics specifically oriented on all parts, there are more consistent readings on all functional tests. This is optimized for best crosstalk, common mode rejection and return loss. - With the selection of common mode material and winding techniques, common mode noise rejection maintains integrity to higher frequencies. - Multiple tabs around shield-to-ground, shield-to-chassis, and shunt noise to ground for improved EMI suppression. Materials Housing: Thermoplastic - UL94V-0 Contacts: Phosphorous Bronze, Nickel underplating and selective gold plating 50 inches max. Part Number Format: J X XXX X X X Example PulseJack Part Number: J Connector Products 1 Platform "1" through hole, locking tab up 8 pin, single. 501 Internal Magnetics Additional electrical specifications can be accommodated. Contact Pulse Applications Engineering at (858) 674-8100 for more information. F Shield Type "F" is standard shield type. Additional mechanical specifications can be accommodated. Contact Pulse Applications Engineering at (858) 674-8100 for more information. 2 EMI Tabs "0": no tabs "2": 2 tabs top 2 tabs each side 2 tabs bottom 1 Number of Ports "1" single port PCB Pins: Phosphorous Bronze with 120 inches Sn90/Pb10 over 50 inches Nickel. Cartridge Brass with 1020 inches Nickel over 10-20 inches Nickel. m m m m Shield: For More Information : UNITED STATES (Worldwide) 12220 World Trade Drive San Diego, CA 92128 U.S.A. http://www.pulseeng.com TEL: 858 674 8100 FAX: 858 674 8262 Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names metioned herein may be trademarks or registered trademarks of their respective owners. Printed on recycled paper. (c)2002, Pulse Engineering, Inc. m UNITED KINGDOM (Northern Europe) 1 & 2 Huxley Road The Surrey Research Park Guildford, Surrey GU2 5RE United Kingdom TEL: 44 1483 401700 FAX: 44 1483 401701 FRANCE SINGAPORE (Southern Europe) (Southern Asia) Zone Industrielle F-39270 Orgelet France TEL: 33 3 84 35 04 04 FAX: 33 3 84 25 46 41 150 Kampong Ampat #07-01/02 KA Centre Singapore 368324 TEL: 65 287 8998 FAX: 65 280 0080 TAIWAN, R.O.C. (Northern Asia) 3F-4, No. 81, Sec. 1 HsinTai Wu Road Hsi-Chih, Taipei Hsien Taiwan, R.O.C. Tel: 886 2 2698 0228 FAX: 886 2 2698 0948 HONG KONG (Great China) 19/F, China United Plaza 1008 Tai Nan West Street Cheung Sha Wan, Kowloon Hong Kong, China TEL: 852 2788 6588 FAX: 852 2776 1055 DISTRIBUTOR PRELIMINARY T667.P (1/02) |
Price & Availability of J1501F21 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |